Links to the Web:     Google  |   MSNSearch  |   MyschoolOnline.in  
Desilting.Com
Skip Navigation Links
Home
Company Profile
Our ServicesExpand    Our Services
Contact Us
Feedback
LATEST DE-SILTING TECHNOLOGY using SPECIAL PURPOSE MOTOR VEHICLE - INDUSTRIAL VACUUM LOADER WITH HIGH PRESSURE WATER JETTING SYSTEM AND SCM


Desilting of sewers:
Ä Desilting operation of sewer proceeds from manhole to manhole. 
Ä Normally cleaning process starts downstream of sewer line.
Ä Selected reach of sewer line is dewatered by submersible pumps and then plugged by means   of  sand bags / M.S plates etc and the flow is diverted.
Ä In between reaches are then flushed by air compressor to remove the harmful gasses.
Ä Multi gas detector is then used to check the concentration of hazardous gasses like H2S,CO2 and CO.
Ä Sewer line is then cleaned by jetting and suction processes.
Ä Thereafter if desired then C.C.T.V is done.
Ä Followed by removal of plugs & pumps.
Ä Normally desilting operation proceeds between 10:00 pm at night to 06:00 am in the morning, for the following reasons:
u Flow of water in the sewer is almost zero
v Traffic Manouvaring on the roads is at its lowest.

Special Purpose Motor Vehicle - Industrial Vacuum  Loader Model Vactruck-6xd-900p With High Pressure Water Jetting System

This Equipment is one of hte most powerful Heavy-duty Equipment of its type available in International Market.The Vacuum Pump ia able to develop up to 8000 MM water coloumn andf is powered with a seperate auxillary Diesel Engine developing at 1500 RPM.The Equipment is fitted with Filter Catridges, wherein the cleaning is carried out continously with Automatic Compressed Air Reverse Pulse Jet. The Equipment is capable of suctioning sludge/slurry consisting if water mixed with sand and slit into the Truck Mounted Cyclonic Containers through specially designed fluidizing noozles from the manhole/open drains from a depth of 8-10 mtrs.The equipment can also suction stone bricks,etc. upto 100 mm size with a suction hose of 150 mm Diameter.


Truck Mounted Cyclonic Sludge/Slit Containers

The Equipment consist of a Truck Mounted Cylindrical Container fitted with Cyclonic Seperators for loading of slurry. The Container is provided with the facility to seperate the water content of the slurry, through a strainer and drain outlets provided in the rear discharge door. This facility enables the container to retain the slit / waste material with minimum water content. This material collected is discharged from the container by hydraulic tippings.



Down Load Technical Specification

All Rights Reserved
Jagdish Construction Company

No. of Hits: 35646